91视频 - 8MAV,电影男人鸡巴插逼,亚洲 综合 图片视频,九九中文视频播放

產品詳情

  • 產品名稱：BMP6 ELISA Kit(BoneMorphogeneticProtein6)

  • 產品型號：
  • 產品廠商：國內供應1
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
BMP6 ELISA Kit(BoneMorphogeneticProtein6)
詳情介紹：
Purpose The kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of BMP6 in human serum, plasma, tissue homogenates and other biological fluids.
Sample Type Biological Fluids, Plasma, Serum, Tissue Homogenate
Analytical Method Quantitative
Detection Method Colorimetric
Specificity This assay has high sensitivity and excellent specificity for detection of this index.
Cross-Reactivity (Details) No significant cross-reactivity or interference between this index and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross- reactivity detection between this index and all the analogues, therefore, cross reaction may still exist.
Sensitivity 0.053 ng/mL
Components
  • Pre-coated, ready to use 96-well strip plate
  • Standard (freeze dried)
  • Standard Diluent
  • Detection Reagent A
  • Detection Reagent B
  • Assay Diluent A
  • Assay Diluent B
  • TMB
  • Stop Solution
  • Wash Buffer (30X)
  • Plate sealer for 96 wells
  • Instruction manual
Material not included
  1. Microplate reader with 450 ± 10nm filter.
  2. Precision single or multi-channel pipettes and disposable tips.
  3. Eppendorf Tubes for diluting samples.
  4. Deionized or distilled water.
  5. Absorbent paper for blotting the microtiter plate.
  6. Container for Wash Solution.
Alternative Name BMP6 (BMP6 ELISA Kit Abstract)
Background Synonyms: VGR, VGR1, Vegetal Related Growth Factor(TGFB-Related)
Gene ID 654
UniProt P22004
Research Area Signaling
Pathways Regulation of Hormone Metabolic Process, Regulation of Hormone Biosynthetic Process
Sample Volume 100 μL
Assay Time 1 - 4.5 h
Plate Pre-coated
Protocol 1. Prepare all reagents, samples and standards
2. Add 100 μL standard or sample to each well. Incubate 2 hours at 37 °C
3. Aspirate and add 100 μL prepared Detection Reagent A. Incubate 1 hour at 37 °C
4. Aspirate and wash 3 times
5. Add 100 μL prepared Detection Reagent B. Incubate 30 minutes at 37 °C
6. Aspirate and wash 5 times
7. Add 90 μL Substrate Solution. Incubate 15-25 minutes at 37 °C
8. Add 50 μL Stop Solution. Read at 450nm immediately.
Assay Procedure

The microtiter plate provided in this kit has been pre-coated with an antibody specific to the index. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific to the index. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain the index, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of the index in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Assay Precision
  • Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
  • Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
  • CV(%) = SD/meanX100
  • Intra-assay: CV<10%
  • Inter-assay: CV<12%
Restrictions For Research Use only
Precaution of Use The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Handling Advice The stability of ELISA Kit is determined by the loss rate of activity. The loss rate of this kit is less than 5?% within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Storage 4 °C,-20 °C
Storage Comment The Assay Plate, Standard, Detection Reagent A and Detection Reagent B should be stored at -20°C upon being received. After receiving the kit , Substrate should be always stored at 4°C.Other reagents are kept according to the labels on vials. But for long term storage, please keep the whole kit at -20°C. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. The test kit may be used throughout the expiration date of the kit (six months from the date of manufacture). Opened test kits will remain stable until the expiring date shown, provided it is stored as prescribed above.
Expiry Date 12 months
Supplier Images
ELISA image for Bone Morphogenetic Protein 6 (BMP6) ELISA Kit (ABIN1028252) Bone Morphogenetic Protein 6 (BMP6) ELISA Kit
激情五月天婷婷,国产在线不卡| 精品好屌妞| 美女18禁久久久久久久久| ww欧美日本| 韩国午夜伦理福利| 欧美人人视频精品| 丝袜麻麻脚交帮我弄| 一本道精品在线看| 亚洲成人视屏网站免费在线观看| 亚韩欧美精品一区二区| 夜夜嗨嗨婷婷少妇| 欧美日韩久久久久久久久久久久久久| 欧美日韩 第1页| 日本女大学生口交| 国产成人三级在线| 欧美日韩亚中文| 久久久久久99精品一区| 午夜婷婷一区| 欧美日韩久久曹| 激情开心黄网| 久久艹艹bbb| 日韩 3p av| 黄色小说网站a级无码| 国产三级片精品视频| 亚洲AV网站在线免费观看| 日韩大鸡吧猛烈输出| 日韩精品高h久久久| 欧美中文无码网址| 草草一区二区| 欧美日韩中文字幕一区二区,99| a形毛片高清视频| 裸体一区二区精品| 泑呦无码综合网| 人妻久久影院| 日韩有码最新在线| 国产看黄片看看88| 亚洲AV激情无码专区在线观看| 激情视频日韩在线| 波多野结衣4区| 美女黄片久久久| 婷婷不卡高清|