91视频 - 8MAV,电影男人鸡巴插逼,亚洲 综合 图片视频,九九中文视频播放

產品詳情

  • 產品名稱：ComplementFragment3a(C3a) ELISA Kit

  • 產品型號：
  • 產品廠商：國內供應1
  • 產品文檔：
你添加了1件商品 查看購物車
簡單介紹：
ComplementFragment3a(C3a) ELISA Kit
詳情介紹：
Purpose The kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of C3a in porcine serum, plasma and other biological fluids.
Sample Type Biological Fluids, Plasma, Serum
Analytical Method Quantitative
Detection Method Colorimetric
Specificity This assay has high sensitivity and excellent specificity for detection of this index.
Cross-Reactivity (Details) No significant cross-reactivity or interference between this index and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross- reactivity detection between this index and all the analogues, therefore, cross reaction may still exist.
Sensitivity 0.27 ng/mL
Components
  • Pre-coated, ready to use 96-well strip plate
  • Standard (freeze dried)
  • Standard Diluent
  • Detection Reagent A
  • Detection Reagent B
  • Assay Diluent A
  • Assay Diluent B
  • TMB
  • Stop Solution
  • Wash Buffer (30X)
  • Plate sealer for 96 wells
  • Instruction manual
Material not included
  1. Microplate reader with 450 ± 10nm filter.
  2. Precision single or multi-channel pipettes and disposable tips.
  3. Eppendorf Tubes for diluting samples.
  4. Deionized or distilled water.
  5. Absorbent paper for blotting the microtiter plate.
  6. Container for Wash Solution.
Alternative Name Complement Component 3a (C3a) (C3a ELISA Kit Abstract)
Sample Volume 100 μL
Assay Time 1 - 4.5 h
Plate Pre-coated
Protocol 1. Prepare all reagents, samples and standards
2. Add 100 μL standard or sample to each well. Incubate 2 hours at 37 °C
3. Aspirate and add 100 μL prepared Detection Reagent A. Incubate 1 hour at 37 °C
4. Aspirate and wash 3 times
5. Add 100 μL prepared Detection Reagent B. Incubate 30 minutes at 37 °C
6. Aspirate and wash 5 times
7. Add 90 μL Substrate Solution. Incubate 15-25 minutes at 37 °C
8. Add 50 μL Stop Solution. Read at 450nm immediately.
Assay Procedure

The microtiter plate provided in this kit has been pre-coated with an antibody specific to the index. Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody preparation specific to the index. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain the index, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of the index in the samples is then determined by comparing the O.D. of the samples to the standard curve.
Assay Precision
  • Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
  • Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
  • CV(%) = SD/meanX100
  • Intra-assay: CV<10%
  • Inter-assay: CV<12%
Restrictions For Research Use only
Precaution of Use The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
Handling Advice The stability of ELISA Kit is determined by the loss rate of activity. The loss rate of this kit is less than 5?% within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Storage 4 °C,-20 °C
Storage Comment The Assay Plate, Standard, Detection Reagent A and Detection Reagent B should be stored at -20°C upon being received. After receiving the kit , Substrate should be always stored at 4°C.Other reagents are kept according to the labels on vials. But for long term storage, please keep the whole kit at -20°C. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. The test kit may be used throughout the expiration date of the kit (six months from the date of manufacture). Opened test kits will remain stable until the expiring date shown, provided it is stored as prescribed above.
Expiry Date 12 months
Supplier Images
ELISA image for Complement Fragment 3a (C3a) ELISA Kit (ABIN1568713) Typical Standard Curve
全国毛片久久精品免费视频| 亚洲经典一区二区三区香蕉视频| 91精品婷婷国产综合| 久久美女做爰高图片看看| 欧美日韩专区成熟另类在线| 啪啪啪大片久久久久| 黄日本不卡一区| 极品粉嫩小穴无码| 久久久国产精选视频一区| 国产人澡人澡人澡| 日本免费久久官网一级| 牛牛精品一区二| 色国产欧美日韩各类都有| 人妻精品一区在线| 国产伦理乱伦AV片| 台湾免费国产一区| 乱人伦人妻中文字幕在线| b在线免费| 偷拍 自拍亚洲| 91沙发午夜精品| 高清无码在线观看国产一区| 欧美日韩一区二区在线中文字幕| 日韩高清一区二区三区在线看| 老司机欧美成人在线| 日韩欧美成人欧美成人| 中文在线无码二区在线| 午夜又猛又粗又爽| 国产黑丝自慰在线看| heyzo无码播放| 五月激情综合日韩欧美| gogo西西久久一区二区| 一区欧美3D欧美| 五月婷婷丁香月网袜喷水| 掰穴色诱日韩卡一卡二卡三| 中国熟女高清白浆一区二区三区| 亚欧洲精品视频竹| 明星Ai视频一区二区三区在线| 国语自产一区和二区天堂自| 激情电影久久| 成人日韩在线观看8459| 五月婷婷激情不卡|